Package org.yamcs.protobuf

Class Pvalue.Ranges.Range.Builder

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • clear

        public Pvalue.Ranges.Range.Builder clear()
        Specified by:
        clear in interface com.google.protobuf.Message.Builder
        Specified by:
        clear in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clear in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • getDefaultInstanceForType

        public Pvalue.Ranges.Range getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public Pvalue.Ranges.Range build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public Pvalue.Ranges.Range buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • clone

        public Pvalue.Ranges.Range.Builder clone()
        Specified by:
        clone in interface com.google.protobuf.Message.Builder
        Specified by:
        clone in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clone in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • setField

        public Pvalue.Ranges.Range.Builder setField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                            Object value)
        Specified by:
        setField in interface com.google.protobuf.Message.Builder
        Overrides:
        setField in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • clearField

        public Pvalue.Ranges.Range.Builder clearField​(com.google.protobuf.Descriptors.FieldDescriptor field)
        Specified by:
        clearField in interface com.google.protobuf.Message.Builder
        Overrides:
        clearField in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • clearOneof

        public Pvalue.Ranges.Range.Builder clearOneof​(com.google.protobuf.Descriptors.OneofDescriptor oneof)
        Specified by:
        clearOneof in interface com.google.protobuf.Message.Builder
        Overrides:
        clearOneof in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • setRepeatedField

        public Pvalue.Ranges.Range.Builder setRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                    int index,
                                                    Object value)
        Specified by:
        setRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        setRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • addRepeatedField

        public Pvalue.Ranges.Range.Builder addRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                    Object value)
        Specified by:
        addRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        addRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • mergeFrom

        public Pvalue.Ranges.Range.Builder mergeFrom​(com.google.protobuf.Message other)
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<Pvalue.Ranges.Range.Builder>

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • mergeFrom

        public Pvalue.Ranges.Range.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                             com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                      throws IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<Pvalue.Ranges.Range.Builder>
        Throws:
        IOException

      • hasStart

        public boolean hasStart()
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;
        Specified by:
        hasStart in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        Whether the start field is set.

      • getStart

        public com.google.protobuf.Timestamp getStart()
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;
        Specified by:
        getStart in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        The start.

      • setStart

        public Pvalue.Ranges.Range.Builder setStart​(com.google.protobuf.Timestamp value)
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;

      • setStart

        public Pvalue.Ranges.Range.Builder setStart​(com.google.protobuf.Timestamp.Builder builderForValue)
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;

      • mergeStart

        public Pvalue.Ranges.Range.Builder mergeStart​(com.google.protobuf.Timestamp value)
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;

      • clearStart

        public Pvalue.Ranges.Range.Builder clearStart()
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;

      • getStartBuilder

        public com.google.protobuf.Timestamp.Builder getStartBuilder()
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;

      • getStartOrBuilder

        public com.google.protobuf.TimestampOrBuilder getStartOrBuilder()
         Generation time of a parameter value.
        optional .google.protobuf.Timestamp start = 7;
        Specified by:
        getStartOrBuilder in interface Pvalue.Ranges.RangeOrBuilder

      • hasStop

        public boolean hasStop()
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;
        Specified by:
        hasStop in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        Whether the stop field is set.

      • getStop

        public com.google.protobuf.Timestamp getStop()
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;
        Specified by:
        getStop in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        The stop.

      • setStop

        public Pvalue.Ranges.Range.Builder setStop​(com.google.protobuf.Timestamp value)
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;

      • setStop

        public Pvalue.Ranges.Range.Builder setStop​(com.google.protobuf.Timestamp.Builder builderForValue)
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;

      • mergeStop

        public Pvalue.Ranges.Range.Builder mergeStop​(com.google.protobuf.Timestamp value)
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;

      • clearStop

        public Pvalue.Ranges.Range.Builder clearStop()
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;

      • getStopBuilder

        public com.google.protobuf.Timestamp.Builder getStopBuilder()
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;

      • getStopOrBuilder

        public com.google.protobuf.TimestampOrBuilder getStopOrBuilder()
         If the value changes, ``stop`` is the generation time of the new value.
 If the parameter expires or the ``maxGap`` has been set, ``stop`` is
 the generation time of the last value plus the expiration time or the
 ``maxGap``.
        optional .google.protobuf.Timestamp stop = 8;
        Specified by:
        getStopOrBuilder in interface Pvalue.Ranges.RangeOrBuilder

      • hasTimeStart

        @Deprecated
public boolean hasTimeStart()
        Deprecated.
         Deprecated. Use ``start`` instead.
        optional string timeStart = 1 [deprecated = true];
        Specified by:
        hasTimeStart in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        Whether the timeStart field is set.

      • getTimeStartBytes

        @Deprecated
public com.google.protobuf.ByteString getTimeStartBytes()
        Deprecated.
         Deprecated. Use ``start`` instead.
        optional string timeStart = 1 [deprecated = true];
        Specified by:
        getTimeStartBytes in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        The bytes for timeStart.

      • setTimeStart

        @Deprecated
public Pvalue.Ranges.Range.Builder setTimeStart​(String value)
        Deprecated.
         Deprecated. Use ``start`` instead.
        optional string timeStart = 1 [deprecated = true];
        Parameters:
        value - The timeStart to set.
        Returns:
        This builder for chaining.

      • clearTimeStart

        @Deprecated
public Pvalue.Ranges.Range.Builder clearTimeStart()
        Deprecated.
         Deprecated. Use ``start`` instead.
        optional string timeStart = 1 [deprecated = true];
        Returns:
        This builder for chaining.

      • setTimeStartBytes

        @Deprecated
public Pvalue.Ranges.Range.Builder setTimeStartBytes​(com.google.protobuf.ByteString value)
        Deprecated.
         Deprecated. Use ``start`` instead.
        optional string timeStart = 1 [deprecated = true];
        Parameters:
        value - The bytes for timeStart to set.
        Returns:
        This builder for chaining.

      • hasTimeStop

        @Deprecated
public boolean hasTimeStop()
        Deprecated.
         Deprecated. Use ``stop`` instead.
        optional string timeStop = 2 [deprecated = true];
        Specified by:
        hasTimeStop in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        Whether the timeStop field is set.

      • getTimeStopBytes

        @Deprecated
public com.google.protobuf.ByteString getTimeStopBytes()
        Deprecated.
         Deprecated. Use ``stop`` instead.
        optional string timeStop = 2 [deprecated = true];
        Specified by:
        getTimeStopBytes in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        The bytes for timeStop.

      • setTimeStop

        @Deprecated
public Pvalue.Ranges.Range.Builder setTimeStop​(String value)
        Deprecated.
         Deprecated. Use ``stop`` instead.
        optional string timeStop = 2 [deprecated = true];
        Parameters:
        value - The timeStop to set.
        Returns:
        This builder for chaining.

      • clearTimeStop

        @Deprecated
public Pvalue.Ranges.Range.Builder clearTimeStop()
        Deprecated.
         Deprecated. Use ``stop`` instead.
        optional string timeStop = 2 [deprecated = true];
        Returns:
        This builder for chaining.

      • setTimeStopBytes

        @Deprecated
public Pvalue.Ranges.Range.Builder setTimeStopBytes​(com.google.protobuf.ByteString value)
        Deprecated.
         Deprecated. Use ``stop`` instead.
        optional string timeStop = 2 [deprecated = true];
        Parameters:
        value - The bytes for timeStop to set.
        Returns:
        This builder for chaining.

      • hasCount

        public boolean hasCount()
         Number of parameter values received in the interval.
 This is the total count of parameters in the interval.
 If the count does not match the sum(counts), it means that not all the values have been sent
        optional int32 count = 4;
        Specified by:
        hasCount in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        Whether the count field is set.

      • getCount

        public int getCount()
         Number of parameter values received in the interval.
 This is the total count of parameters in the interval.
 If the count does not match the sum(counts), it means that not all the values have been sent
        optional int32 count = 4;
        Specified by:
        getCount in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        The count.

      • setCount

        public Pvalue.Ranges.Range.Builder setCount​(int value)
         Number of parameter values received in the interval.
 This is the total count of parameters in the interval.
 If the count does not match the sum(counts), it means that not all the values have been sent
        optional int32 count = 4;
        Parameters:
        value - The count to set.
        Returns:
        This builder for chaining.

      • clearCount

        public Pvalue.Ranges.Range.Builder clearCount()
         Number of parameter values received in the interval.
 This is the total count of parameters in the interval.
 If the count does not match the sum(counts), it means that not all the values have been sent
        optional int32 count = 4;
        Returns:
        This builder for chaining.

      • getEngValuesList

        public List<Yamcs.Value> getEngValuesList()
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;
        Specified by:
        getEngValuesList in interface Pvalue.Ranges.RangeOrBuilder

      • getEngValuesCount

        public int getEngValuesCount()
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;
        Specified by:
        getEngValuesCount in interface Pvalue.Ranges.RangeOrBuilder

      • getEngValues

        public Yamcs.Value getEngValues​(int index)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;
        Specified by:
        getEngValues in interface Pvalue.Ranges.RangeOrBuilder

      • setEngValues

        public Pvalue.Ranges.Range.Builder setEngValues​(int index,
                                                Yamcs.Value value)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • setEngValues

        public Pvalue.Ranges.Range.Builder setEngValues​(int index,
                                                Yamcs.Value.Builder builderForValue)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • addEngValues

        public Pvalue.Ranges.Range.Builder addEngValues​(Yamcs.Value value)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • addEngValues

        public Pvalue.Ranges.Range.Builder addEngValues​(int index,
                                                Yamcs.Value value)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • addEngValues

        public Pvalue.Ranges.Range.Builder addEngValues​(Yamcs.Value.Builder builderForValue)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • addEngValues

        public Pvalue.Ranges.Range.Builder addEngValues​(int index,
                                                Yamcs.Value.Builder builderForValue)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • addAllEngValues

        public Pvalue.Ranges.Range.Builder addAllEngValues​(Iterable<? extends Yamcs.Value> values)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • clearEngValues

        public Pvalue.Ranges.Range.Builder clearEngValues()
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • removeEngValues

        public Pvalue.Ranges.Range.Builder removeEngValues​(int index)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • getEngValuesBuilder

        public Yamcs.Value.Builder getEngValuesBuilder​(int index)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • getEngValuesOrBuilder

        public Yamcs.ValueOrBuilder getEngValuesOrBuilder​(int index)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;
        Specified by:
        getEngValuesOrBuilder in interface Pvalue.Ranges.RangeOrBuilder

      • getEngValuesOrBuilderList

        public List<? extends Yamcs.ValueOrBuilder> getEngValuesOrBuilderList()
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;
        Specified by:
        getEngValuesOrBuilderList in interface Pvalue.Ranges.RangeOrBuilder

      • addEngValuesBuilder

        public Yamcs.Value.Builder addEngValuesBuilder()
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • addEngValuesBuilder

        public Yamcs.Value.Builder addEngValuesBuilder​(int index)
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • getEngValuesBuilderList

        public List<Yamcs.Value.Builder> getEngValuesBuilderList()
         Since Yamcs 5.4.1 there is a new parameter minRange in the GetParameterRangesRequest which allows 
 specifying the minimum length of the range returned.
 Practically we guarantee that stop-start >= minRange (mind the leap seconds!).
 If the minRange parameter is set, the returning ranges may include multiple values.
 These are given by the engValues and counts below. 
 Since Yamcs 5.4.2 there is a new parameter maxValues which allows to limit the number 
 of distinct values returned across all the ranges.
 In order to not return ranges containing no value, each range will have at least one value even if
 that will cause the total number of range values returned to exceed the maxValues parameter
 The counts correspond one to one to the engValues, the two arrays will always have the same length.
        repeated .yamcs.protobuf.Value engValues = 5;

      • getCountsCount

        public int getCountsCount()
         The counts correspond one to one to the engValues
        repeated int32 counts = 6;
        Specified by:
        getCountsCount in interface Pvalue.Ranges.RangeOrBuilder
        Returns:
        The count of counts.

      • getCounts

        public int getCounts​(int index)
         The counts correspond one to one to the engValues
        repeated int32 counts = 6;
        Specified by:
        getCounts in interface Pvalue.Ranges.RangeOrBuilder
        Parameters:
        index - The index of the element to return.
        Returns:
        The counts at the given index.

      • setCounts

        public Pvalue.Ranges.Range.Builder setCounts​(int index,
                                             int value)
         The counts correspond one to one to the engValues
        repeated int32 counts = 6;
        Parameters:
        index - The index to set the value at.
        value - The counts to set.
        Returns:
        This builder for chaining.

      • addCounts

        public Pvalue.Ranges.Range.Builder addCounts​(int value)
         The counts correspond one to one to the engValues
        repeated int32 counts = 6;
        Parameters:
        value - The counts to add.
        Returns:
        This builder for chaining.

      • addAllCounts

        public Pvalue.Ranges.Range.Builder addAllCounts​(Iterable<? extends Integer> values)
         The counts correspond one to one to the engValues
        repeated int32 counts = 6;
        Parameters:
        values - The counts to add.
        Returns:
        This builder for chaining.

      • clearCounts

        public Pvalue.Ranges.Range.Builder clearCounts()
         The counts correspond one to one to the engValues
        repeated int32 counts = 6;
        Returns:
        This builder for chaining.

      • setUnknownFields

        public final Pvalue.Ranges.Range.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        setUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>

      • mergeUnknownFields

        public final Pvalue.Ranges.Range.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        mergeUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<Pvalue.Ranges.Range.Builder>